How to Change the Windows 7 Startup
Sound
INFORMATION
This will show you how to change the
Windows 7 start-up sound, not the Windows
logon sound, to any WAV file of your choice.
You can only do this while logged on to a
administrator account.
NOTE
If you run a sfc /scannow command, then you will lose all changes made to the system file in the
tutorial below since it and all other system files will be restored back to default by the command.
WARNING
Making a mistake while modifying system files can render your Windows 7 installation unusable.
To be safe, you should create a restore point before doing this tutorial in case you need to do
a system restore at boot using the restore point to undo any mistakes that may be made.
OPTION ONE
CHANGE WINDOWS 7 STARTUP SOUND
1. In Windows Explorer, navigate to C:\Windows\System32\imageres.dll.
(see screenshot below)
2. Right click on the imageres.dll file, and click on Copy. (see screenshot above)
3. Right click on your desktop, and click on Paste.
4. If you have not already, then download and install Resource Hacker 3.5.2.84 Beta (or
newer version if available).
5. Right click on the Resource Hacker shortcut in Start Menu - All Programs, then click on Run
as administrator. (see screenshot below)
6. If prompted by UAC, then click on Yes.
7. In Resource Hacker, click on File and Open. (see screenshot below)
8. Navigate to and select the imageres.dll file copy on your desktop, and click on Open.
(see screenshot below)
9. In the left pane of Resource Hacker, expand WAVE, and 5080, to 1033.
(see screenshot below)
NOTE:
If 5080 and 1033 is named something else, then that is fine as long as they are still under
WAVE. Just substitute what you have instead in the steps below. You can click on the Play
WAVE button to hear what the current startup sound is.
10. Right click on 1033 and click on Replace Resource. (see screenshot below)
11. Click on Open file with new resource. (see screenshot below)
12. Navigate to and select the .wav file that you want for the startup sound, and click on Open.
(see screenshot below)
NOTE:
This .wav file must remain at this same location. If you move or delete this .wav file, the startup
sound will no longer play it.
13. Under Resource Type, type WAVE. Under Resource Name, type 5080. Under Resource
Language, type 1033. Click on the Replace button. (see screenshots below)
14. Click on File and Save, then close Resource Hacker. (see screenshot below)
NOTE:
You can click on the Play WAVE button first to hear and verify what the current startup sound is
set as in this file.
15. On your desktop, Move and Save the imageres_original.dll file to a safe location.
WARNING
THIS IS YOUR ONLY BACKUP OF THE ORIGINAL IMAGERES.DLL FILE WITH THE
DEFAULT STARTUP SOUND.
16. Check to make sure that the Play Windows Startup sound is checked in Sound so that
it is turned on. (see screenshot below)
17. Restart the computer and boot into the System Recovery Options (WinRE) screen, then
select the Command Prompt option and press enter.
18. In the command prompt, type diskpart and press enter. (see screenshot below step 22)
19. In the command prompt, type list volume and press enter. (see screenshot below step 22)
20. Make note of what the drive letter is for your Windows 7 partition or drive.
(see screenshot below step 22)
NOTE:
For example, mine is listed as D here.
21. In the command prompt, type exit and press enter.
(see screenshot below step 22)
22. In the command prompt, type the command below and press enter. (see screenshot below)
NOTE:
Substitute D in the command below with the drive letter you have listed in step 20 for your
Windows 7, and substitute username in the command below with your user account name.
CODE:
COPY /V /Y "D:\Users\username\Desktop\imageres.dll" “D:\Windows\System32"
23. Close the command prompt, and click on the Restart button. (see screenshot above)
24. As Windows 7 restarts, you will hear your new startup sound.
OPTION TWO
RESTORE DEFAULT WINDOWS 7 STARTUP SOUND
1. Copy the default backup imageres_original.dll file (step 15 above) to your desktop.
2. Right click on the imageres_original.dll file and click on Rename.
3. Rename it to imageres.dll and press enter.
4. Repeat steps 17 to 24 above to restore this file.
0 comments:
Post a Comment